Baseus Encok E09 Manual __full__ Jun 2026

Press and hold the Light Button to turn the rear ambient light on or off. Charging and Battery Management

To turn off the alarm completely for the day, press and hold the power button while it is ringing. 5. Bluetooth Pairing and Audio Playback

Look for the icon on the screen. Hold down the clock button until the time flashes.

Take a moment to inspect the earbuds and charging case for any visible damage or defects. If you notice any issues, contact the manufacturer or retailer immediately. baseus encok e09 manual

This comprehensive manual provides step-by-step instructions to set up, operate, and troubleshoot your Baseus Encok E09. Technical Specifications Specification ABS + Silicone Bluetooth Version Device Name Baseus Encok E09 Communication Distance 10 meters (32.8 feet) Standby Time Music Time 6 to 9 hours (at 70% volume) Call Time 6 to 9 hours Charging Time Approximately 4 hours Battery Capacity 1500mAh / 3.7V Frequency Response Range 100Hz - 20KHz Suitable For All wireless-enabled devices Package Contents 1 x Baseus Encok E09 Smart Alarm Clock Speaker 1 x USB Charging Cable 1 x 3.5mm Audio Cable (AUX) 1 x User Manual 1 x Warranty Card Device Layout and Button Functions

If the software freezes, look for the small reset hole (usually near the charging port) and gently press it with a paperclip.

Short press to go to the previous song or radio station. Long press to decrease the volume. Press and hold the Light Button to turn

If you are experiencing a specific issue with your speaker, let me know:

: 1500 mAh, providing up to 6 hours of music playback and 40 hours of standby.

Repeat the process by pressing again to find and configure Alarm 2. Activating and Deactivating Alarms Bluetooth Pairing and Audio Playback Look for the

Connect the included Micro-USB cable to the charging port on the back of the device. Plug the other end into a standard 5V/1A power adapter.

The built-in radio function helps you scan and listen to stations.

The is not a disaster, but it fails exactly where a new user needs help most: resetting, touch zone locations, and mono mode switching.